IRK LAMP FOR MANROLAND 706 LV
TYPE: 1040 IRK6+TL4+KW
Gold reflector Voltage =400V
Wattage =6000W
Total length =1150mm
Heat length=1000mm
Cable length =350mm
Cross section=23×11mm
Burning position =Horizontal
MR Part#: 80.96U40-1870
HERAEUS 51760

viscosity
150 mm²/s

Operating temperature
-40 °C bis 160 °C

field of use

• roller bearing

• bearings

• racks

business

• Power Tools

• Wood

• bearing manufacturer

functionality

• High temperature grease

• Low-temperature grease

packing

• 250 g tube

• 400 g cartridge

• 1 kg can

• 5 kg bucket

• 18 kg hobbock

• 50 kg hobbock

• 150 kg barrel

ELKALUB GLS 964/N2 is a lubricating grease with good wear and corrosion protection properties. It has been designed for use in roller and slide bearings, especially for permanently changing directions of movement. The integrated thixotropy permits the build-up of a more solid grease collar at the outer side of bearings. By that, the spin-off of grease and the penetration of foreign particles is reduced. Examples of application: gripper shafts, spindles, badly sealed bearings.

viscosity
150 mm²/s

Operating temperature
-25 °C bis 130 °C

field of use

• roller bearing

• bearings

business

• print

• Food

• beverages

• Pharma & Medicine

• bearing manufacturer

• plant construction

functionality

• Food grease

packing

• 250 g tube

• 100 g cartridge

• 380 g LubeShuttle

• 400 g cartridge

• 1 kg can

• 5 kg bucket

• 18 kg hobbock

• 50 kg hobbock

• 150 kg barrel

ELKALUB LA 8 is a highly viscous special lubricant which at the same time possesses an excellent creeping ability. ELKALUB LA 8 is mainly intended for the lubrication of highly loaded chain transmissions. The very adhesive film with EP and boundary lubrication capabilities, which is formed by ELKALUB LA 8 is extremely resistant against centrifugal forces and pressure. ELKALUB LA 8 is recommended or prescribed by leading printing press manufacturers. ELKALUB LA 8 is used straight for all types of chain transmissions or as an additive (5-20 %) for mineral oils for all points of lubrication which need a particularly adhesive type of lubricant. ELKALUB LA 8 has an anti-noise effect. Examples for application: Delivery chains, guide rails, eccentrics, gripper opening curves, open gear wheels, chain guideways.

Viscosity at 40 ° C
6000 mm²/s

packing

• 1 liter can

• 5 l jug

• 20 l jug

• 200 l barrel

Part Number: DVT3.80

The DVT 3.80 is an oil-free combination blast air/vacuum pump. It's rugged and durable design provides continuous operation for printing and packaging industry applications. The pump utilizes self-lubricating graphite vanes, requires minimal maintenance, and removes the need for oil changes. Each unit comes standard with a built-in inlet filter, an aftercooler, and pressure/vacuum regulating valves.

• 100% dry operation
• Long vane life
• Continuous dry duty rated
• Single shaft direct drive
• 48 SCFM
• Simultaneous 8.7 PSIG and 18 in. Hg

Contact us for pricing

• Pump Type : Combined

• Pump CFM : 48 CFM

• Max Pressure : 8.7 PSIG

• Max Vacuum : 18 in. Hg

• Power : 6.4 HP

Part Number: DVT3.140

The DVT 3.140 is an oil-free combination blast air/vacuum pump. It's rugged and durable design provides continuous operation for printing and packaging industry applications. The pump utilizes self-lubricating graphite vanes, requires minimal maintenance, and removes the need for oil changes. Each unit comes standard with a built-in inlet filter, an aftercooler, and pressure/vacuum regulating valves.

• 100% dry operation
• Long vane life
• Continuous dry duty rated
• Single shaft direct drive
• 94 SCFM
• Simultaneous 8.7 PSIG and 18 in. Hg

Contact us for pricing

• Pump Type : Combined

• Pump CFM : 94 CFM

• Max Pressure : 8.7 PSIG

• Max Vacuum : 18 in. Hg

• Power : 12.1 HP

 Size: 12 mm x 50 meters

Thickness: 200 micron

Product Description Double Sided Polyester ( PET) Tape It is a transparent double sided self adhesive tape, consisting of a polyester backing and acrylic adhesive. It has excellent quick double stick, strong adhesion and high tensile strength. A perfect subsitute of glue for bonding purpose....

Part Number: VT4.40

The VT 4.40 is a dry displacement, medium vacuum pump. It's rugged and durable design provides continuous operation for printing, packaging, CNC routing and other industry applications. The pump utilizes self-lubricating graphite vanes, requires minimal maintenance, and removes the need for oil changes. Each unit comes standard with a built-in inlet filter, a vacuum regulating valve, vibration isolators, and discharge silencers.

• 100% dry operation
• Long vane life
• Continuous duty rated
• 28 SCFM
• 25.5 in. Hg

Part Number: 02000016400

Becker pump rotor: # 02000016400

For Becker models:

• DT 3.25 / 4.25 (K)
• T 3.25 / 4.25 DSK/DV
• VT 3.25 / 4.25

ELKALUB FLC 400 is a high-temperature spray based on perfluoropolyether oil (PFPE). The high-quality oil base allows permanent lubrication up to 300 °C.

The lubricating film of ELKALUB FLC 400 is odorless, transparent, waterproof and radiation-resistant. Common plastic and elastomer materials (except fluoropolymers) are not attacked.

Typical applications of ELKALUB FLC 400 are the lubrication of embossing, punching and gluing tools that are operated at high temperatures. Chains and sliding applications of all kinds such as guides, rails, cams and sliders also benefit from the option of high-temperature lubrication.

PFPE-based lubricants are not compatible with other lubricants. Before using ELKALUB FLC 400, the lubrication point must be cleaned with as little residue as possible (e.g. ELKALUB LFC 500).